⭐MINT⭐ Yaesu FT-DX3000D HF Amateur Ham Radio Transceiver 160m-6m 5-100 Watts

Description

⭐MINT⭐ Yaesu FT-DX3000D HF Amateur Ham Radio Transceiver
I have for sale a very nice working Yaesu FTDX-3000D with the original box, MH-31B8 hand microphone, FH-2 remote keypad, power cable, and manual
.
This radio is in pristine cosmetic condition and has been updated to the latest firmware version. I purchased this radio new and never used it, so it's time to clear out the shack. My loss is your gain!
Other than when it was out of the box for firmware updates, the radio has always been stored in its original box in a climate controlled and smoke free environment.
Photos show all sides of the transceiver and the included accessories. Power supply shown in photo is NOT included in this auction.
I'm selling as-is, no returns or refunds, all sales final. No test runs or part swappers. Radio works as intended. No shipping outside the United States. Please feel free to ask questions. Thanks for looking!
Description:
The
Yaesu FT
DX
3000
transceiver provides ultimate weak signal receiver performance in crowded, strong signal environments. General coverage receive is available from 30 kHz to 56 MHz. Power is adjustable 5 to 100 watts for the amateur bands from 160 to 6 meters.
A built-in 4.3-in TFT wide full
color high-resolution display provides superior operability and visibility for the FT
DX
3000 user. A high speed spectrum scope located just below the LCD display gives the operator all the information needed to place them at the right place on the band with the right receiver set-up to have a satisfying experience with a casual QSO chat or while digging out a rare desired weak signal contact. Other refinements include: USB interface, 9 MHz IF output, RX-only antenna input, RTTY/PSK encoder/decoder, high speed antenna tuner and a specialized 50 MHz amplifier.
The FT
DX
3000 requires 13.8 VDC at 23 Amps. This radio comes with the MH-31
B8
hand mic, FH-2 wired keypad, DC cable spare fuses and plugs.
A high speed automatic ATU included. It has a large capacity 100 channel memory; the tuning data is automatically memorized to reduce tuning time when changing frequency. These tuners can handle up to a 3:1 mismatch.
A USB input is included for firmware updates. This input can also facilitate CAT, USB AUDIO IN / OUT and USB TX Control (PTT, KEY and FSK).
A high contrast 4.3 inch TFT LCD full color screen provides a convenient view of the radio's working functions. The High Speed Spectrum Scope function has a bandwidth of: 20 kHz, 50 kHz, 100 kHz, 200 kHz, 500 kHz, or 1 MHz. TX and RX markers appear during "split" operation.
Their powerful narrow bandwidth crystal roofing filter enhances the receiver's multi-signal characteristics. A 3-kHz roofing filter greatly improves SSB signal reception during close adjacent multi signal conditions. The 600 Hz roofing filters provide the best CW receiving environment when the adjacent signals may affect the desired signal reception.
They include a High-Q IF Notch circuit has steep attenuation characteristics of 70dB or more. Effective removal of a strong beat signal is easily obtained. Interfering signals may be attenuated, while minimizing the impact on the desirable received signal.
The Digital Notch Filer (DNF) is a feature that automatically follows the interfering heterodyne signals, even if there are more than one, and even if the beat frequency changes with time. This is effective in removing jamming signals.
In the CW mode, the APF (Audio Peak Filter) function has an audio peak at the signal frequency; this improves the S/N and increases the readability of the CW signal. The APF peak frequency can be finely aligned.
The modulation circuit of the FT DX 3000 utilizes the digital variation operational modulation type, which creates ideal high quality transmission audio. The parametric equalizer can alter the Low, Mid and High part of the audio separately.
The SSB Speech Processor uses IF digital signal processing to increase the intelligibility of the transmitted signal during weak signal crowded conditions. The DSP increases the average power of the important speech spectrum components and reduces the TX power of the less significant components.
Three antenna connectors are available on FT DX 3000 Rear Panels. Antenna connection selections memorized and recalled when changing bands. The "ANT 3" input can be set for the "RX Only" antenna.
An "RX Output" connector on FT DX 3000 Rear Panel accesses signals from the receiver's RF amplifier. The signal can then be output to an external receiver for in-band simultaneous receiving.