-40%
Yaesu FT-1000MP MkV Field Transceiver - Enhanced Digital Signal Processing EDSP
$ 633.6
- Description
- Size Guide
Description
Yaesu FT-1000MP MkV Field Transceiver - Enhanced Digital Signal Processing (EDSP)I am original owner, radio includes, Operator Manual (With Schematics), AC Power Cord, and MH-31B8 hand mic. Shipped in original Yaesu factory double boxes.
The Yaesu FT-1000MP MkV Field HF Transceiver, is a member of the proud FT-1000 bloodline. The Field version brings you this leading edge technology in a 100 watts, self contained designed. With both built in AC power supply, and 13.8 VDC power supply. This radio also features a built-in high speed automatic antenna tuner capable of matching loads between 16.5 and 150 ohms to better than 1.2:1 SWR.
Optional Filters Installed: INRAD Roofing Filter, Yaesu XF-114SN Narrow 2Khz SSB Filter and Yaesu XF-110SN Narrow 2Khz SSB Filter.
Features Dual Receive, Class A PA Operation, Integrated Shuttle Jog Control, 10 Pole Collins Mechanical Filter, and DSP Auto Notch. Enhanced DSP 13 Tuning Steps Manual and Auto AGC.
Looks and works PERFECT.
TRANSMITTER
Power Output: Adjustable up to 100 watts (25 watts AM carrier),
Harmonic Radiation: Better than -60 dB (Typical)
SSB Carrier Suppression: At least 40 dB below peak output
Undesired Sideband Suppression: At least 55 dB below peak output
Audio Response (SSB): Not more than -6 dB from 400 to 2600 Hz
3rd-order IMD: - 31 dB @ 100 watts PEP, or better
(Class A mode) - 40 dB @ 25 watts PEP (Typical)
Microphone Impedance: 500 to 600 Ohms
RECEIVER
Circuit Type: Quad-conversion superheterodyne (triple conversion for FM)
Main RX: 70.455 MHz/8.215 MHz/455 kHz,
Sub RX: 47.21 MHz/455 kHz
Sensitivity :
Modes 0.5 - 1.8 MHz
1.8 - 30 MHz
SSB/CW (2.0 kHz) 2 uV
0.16 uV
AM (6 kHz) 13 uV
2 uV
FM 0.5 uV
(with preamp on, IDBT on, SSB/CW/AM for 10 dB S/N, FM for 12 dB SINAD, 0 dB u = 1 uV)
IF Rejection (1.8 ~ 30 MHz): 80 dB or better (Main RX), 60 dB or better
Image Rejection (1.8 ~ 30 MHz): 80 dB or better (Main), 50 dB or better
Maximum Audio Output: 2.0 W into 4 Ohms with <10 % THD
Audio Output Impedance: to 8 Ohms
Looks and works PERFECT.