-40%
Ranger RCI-2970N4 Dual Band 400 Watt 10-12 Meter Mobile Transceiver BRAND NEW
$ 395.99
- Description
- Size Guide
Description
We are sellingBrand New - Sealed - Never Opened - Complete:
Ranger RCI-2970N4 400 Watt Output Dual Band Ameteur 10-12 Meter Mobile Transceiver (AM/FM/USB/LSB/CW/PA)
Ranger Communications once again sets the performance and reliability standard for entry level
amateur mobile transceivers by introducing the new RCI-2970N4, new version colour LED display.The RCI-2970N4, rated at 400W PEP, is perfect for the recent band openings on 10 and 12 meters. Now you can upgrade your mobile Ham capabilities with a radio that is rich in features and reasonable in cost.
General Features:
Frequency Range: 12 meter 24.8900 ~24.9900 MHz
10 meter 28.0000 ~29.6999 MHz
Tuning Steps 100 Hz, 1 KHz, 10 KHz,
100 KHz, 1 MHz
Emission USB, LSB, CW, AM, FM
Frequency Control Phase-Lock-Loop Synthesizer
Frequency Tolerance 0.01%
Frequency Stability 0.00%
Operating Temperature Range -10OC to +50OC
Antenna Impedance 50 ohm
Microphone Plug-In (6-Pin), 400 W Dynamic PTT
Meter Function RF Output, RX Receive Signal
Strength, SWR
Input Voltage 13.8 V DC
Dimensions 7 7/8″ (W) x 11 1/8″ (D) x 3 1/4″ (H)
Weight 7 lb. 13.2 oz.
TRANSMITTER
RF Power Output AM/FM/CW: 200W. RMS
SSB: 400W. PEP
RF Transmit Modes USB, LSB, CW, AM, FM
Antenna Connector UHF Type, 50 W
Modulation 16F3, A3E, J3E, A1A
Spurious Emissions >60 dB
Carrier Suppression -50 dB
RECEIVER
Sensitivity AM/CW : 0.5 μV for 10dB Sinad
FM : 0.25μV for 12dB Sinad
USB/LSB : 0.15μV for 10dB Sinad
Image Rejection Ratio -65 dB
AGC Figure of Merit SSB/CW/AM : 80dB at 50mV for a
10dB change in Audio Output
Audio Power Output 2.5W
There is a full manufacturers warranty included with every radio we sell.Manufacturers of 10 meter radios do not allow returns for any reason and therefore 10 Meter radios are NOT acceptable for return and carry a factory warranty only. Connex , General President, Galaxy, Ranger and Stryker radios cannot be returned to us. Warranty for 10 meter radios are handled directly (information can be found in factory user manual) by the respective manufacturer.