NEW ICOM IC-2300H VHF 65W EXP TX/RX 136-174 MIL-STD810 Transceiver Mobile Radio

Description

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ICOM IC-2300H EXP VHF FM Radio
Product code: ICOM IC-2300H
The IC-2300H comes with:
IC-2300H Transceiver(TX/RX:136-174MHz), the IC-2300H has the 3D GENUINE Icom hologram label attached on its radio body
HM-133V remote DTMF Hand mic
mobile mounting bracket
9.8 foot(3m) DC power cable and spare fuses
Mounting screws, nuts and washers
English Instruction Manual(PDF media type, Not paper)
PS: Transmission is inhibited in the marine channel mode(Can Not TX in marine channel mode)
Tough & Built to Last
Long Lasting Power and Icom Quality
65 Watts of RF Output Power with Heavy Duty Endurance
Powerful 4.5W Audio Output Provides Loud and Clear Audio
Tested to the Latest MIL-STD 810 G Specifications
Stable 65W of output power*
The IC-2300H can generate 65W of output power. The rugged aluminum diecast provides effective heat dissipation and keeps RF output even during high duty cycle continuous transmission.
* Output power differs depending on version and specific regulatory requirements.
A total of 207 memory channels
The IC-2300H has a total of 207 memory channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 6 characters for easy recognition.
Built-in CTCSS and DTCS encoder/decoder
The CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. The tone scan function detects the subaudible tone that is used for repeater access. The pocket beep function gives you an audible and visual indicator of an incoming call.
The DTCS encoder function (DTCS transmit only) is also available.
Simple operation
The IC-2300H retains the basic panel layout and its user interface from the IC-2200H. A 70.6×20 mm LCD display offers a good viewing angle suitable for mobile operation. The bottom of the display indicates the available functions of the front panel buttons directly below the display.
Multiple scan functions
The IC-2300H supports various scan types for maximum reception and ease of use. The DMS (Dynamic Memory Scan) system allows you to scan selected banks from 10 memory banks by simply adding and deleting bank links .
Tested to the MIL-STD 810 G specifications
The IC-2300H is built tough to protect from a rough road. It has been tested to and has passed the latest MIL-STD 810 G specifications including shock, vibration and temperature tests.
Optional Active Noise Canceling Microphone
The optional active noise canceling microphone HM-209 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.
Other features
Power supply voltage display
Wide/narrow channel setting
4.5W (typical) loud audio
Reduced depth dimensions
DTMF autodial
Time-out timer
Repeater lockout
Automatic power off
S-meter squelch
Selectable LCD backlight color (amber, yellow and green)
Weather channel receive and alert function (USA version only)
Automatic repeater function (USA version only)
Selectable squelch delay from short and long
Squelch attenuator reduces suppression from strong signals
PC to transceiver and transceiver to transceiver cloning capability
(optional cloning software, CS-2300H and/or cloning cable required)
Specifications
General
Frequency coverage
TX: 136–174MHz,
RX: 136–174MHz
Number of channels
207 channels
(including 6 scan edges, and 1 call)
Type of emission
F2D, F3E (FM)
Power supply requirement
13.8V DC ±15%
Current drain
Tx (65W)
11A
Rx
Stand-by
0.4A
Max. audio
1.5A
Antenna impedance
50Ω (SO-239)
Operating temperature range
–10°C to +60°C; 14°F to +140°F
Dimensions
(projections not included; W×H×D)
140×40×162 mm;
5.51×1.57×6.38 in
Weight (approx.)
1.1 kg; 2.43lb
Transmitter
Output power* (at 13.8V DC)
65W, 25W, 10W, 5W
Max. frequency deviation
Wide
±5.0kHz
Narrow
±2.5kHz
Spurious emissions
Less than –60dBc
Frequency stability
±3ppm
Microphone impedance
600Ω (8-pin modular)
* Output power differs depending on version and specific regulatory requirements.
Receiver
Intermediate frequencies
46.35MHz/450kHz
Sensitivity at 12dB SINAD
Less than 0.18μV
Adjacent channel
selectivity
Wide
More than 6kHz (at 6dB)
Less than 14kHz (at 60dB)
Narrow
More than 3kHz (at 6dB)
Less than 9kHz (at 55dB)
Spurious response rejection
More than 60dB
Audio output power
4.5W typ. (10% dist. 4Ω load)
External speaker connector
2-conductor 3.5 (d) mm (1⁄8ʺ)/4Ω
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard
MIL 810G
Method
Procedure
Low Pressure
500.5
I, II
High Temperature
501.5
I, II
Low Temperature
502.5
I, II
Temperature Shock
503.5
I-C
Solar Radiation
505.5
I
Vibration
514.6
I
Shock
516.6
I, IV
Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.
International buyers paying and shipping information:
All items could ship worldwide.
1.Paying methods:
A. We prefer Paypal.
B. Other paying method please ask before you bid.
2.      Shipping Fee & Methods:
The standard shipping rate is for Registered Post Office Airmail small packet. After receiving payment, we will send what you win on auction between 2days . The shipping time is 2 weeks to buyer’s location if not any delay. We can not offer airmail parcel to Italy, only EMS or FedEx to Italy.
We can send items via EMS or Fedex but the shipping fee would be different.