Clemco Cool Air Conditioner for HP blasting helmets #23825

Description

Clemco Cool Air Conditioner for HP blasting helmets #23825
New Clem-CoolAir Conditioner
allows the blast operator to control the temperature and volume of air to a Clemco high-pressure Type CE continuous flow supplied-air respirator within a preset range and to cool the air by as much as
50 degrees F
. Approved by NIOSH for use only with Clemco Apollo HP high-pressure Type CE supplied-air respirators (not for use with low-pressure respirators).
Requirements for Operation:
20 cfm at 90 to 100 psi of Grade D quality breathing-air as defined by the Compressed Gas Association Commodity Specification: G-7.1) (
www.cganet.com)
Pressure requierements vary with hose length. (hose offered in 25 ft increments) Minimum pressure to produce minimum airflow to respirator.
25 ft - 75 ft 90 psi
100 ft - 200 ft 95 psi
NOTES:
1. Maximum air pressure: 100 psi.
2. Maximum hose length: 200 ft when used with respirator.
Can ship from various locations in small or large quantities.
For all your sandblasting needs please check our store or call us at 954  -   923  -  8323.
Our goal is to provide world class customer service and the lowest prices possible.
Abrasive Blasting Depot.