50KHz-200MHz / 50KHz-2GHz Malachite Malahit DSP SDR Shortwave Radio Receiver US

Description

Home
Arduino
Module
Sensor
Chips
About Us
Type #1 50KHz-200MHz 3.5inch
Advantages:
- Aluminum alloy shell
- Malahit DSP SDR Receiver
- 3.5" IPS display touch screen
- Default frequency range: 50KHz-200MHz
- Demodulation mode: AM, SSB, NFM, WFM
Product Parameters:
1) The radio is constructed based on SDR principle, and the function is determined by loaded software.
2) The frequency range is from 50 kHz to 200 MHz (default version) / from 50 kHz to 250 MHz, 400 MHz to 2 GHz (registered upgrade version).
3) All types of analog modulation: AM, SSB, NFM, WFM;
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, Noise Blanker, AGC, equalizer.
5) Use fully functional chip msi001;
6) The powerful stm32h743 with a clock frequency of 480 MHz is applied.
7) 3.5-inch IPS display touch screen.
8) There is a built-in UHF.
9) Control 2 encoders with buttons and touch screen.
10) The power supply is supplied by the external TYPE-C (for Huawei mobile phone) interface and can be charged by TYPE-C. The internal battery voltage is 3.7V and the capacity is 2500mAh.
11) The current consumption when listening to headphones is 300mA.
12) Built-in receiving module in order to improve the HF reception on antenna, an additional board with a source follower has been developed. The board will be built into the standard receiver design.
13) Connect to a computer via USB, you can transmit CAT, IQ and audio.
14) 160 kHz span, with scalability.
15) Sensitivity-Under the condition of up to 250MHz, 0.3μV = 10dB at s / w.
16) Thanks to the characteristics of the msi001 chip used, dynamic blocking range is about 85dB.
17) There is backlight control.
18) SMA female antenna socket;
19) Dimensions 102 x 74 x 29mm (excluding sizes of protrusions).
20) Weight 240g.
Package Included:
1 x SDR Receiver & Antenna
==============================================================
Type #2 50KHz-2GHz 3.5inch
50KHz To 2GHz Full Frequency Receiver Offline Handheld SDR Malachite Radio Registered Version
Malachite SDR registered version 50K-2G
Product parameter introduction
1) The radio is constructed based on the SDR principle, and the function is determined by the loaded software.
2) The frequency range is from 50 kHz to 200 MHz (default version) / from 50 kHz to 250 MHz, 400 MHz to 2 GHz (registered upgrade version).
3) All types of analog modulation: AM, SSB, NFM, WFM;
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, Noise Blanker, AGC, equalizer.
5) Use the fully functional chip msi001;
6) The powerful stm32h743 with a clock frequency of 480 MHz is applied.
7) 3.5-inch IPS display with touch screen.
8) There is a built-in UHF.
9) Control 2 encoders with buttons and touch screen.
10) The power supply and charging are powered by the external TYPE-C interface. Built-in 3.7V@2500mAh polymer lithium battery.
11) Built-in 8 ohm 1W speaker, consumption current is 300mA.
12) Built-in receiving module In order to improve the HF reception on the antenna, an additional board with a source follower has been developed. The board will be built into the standard receiver design.
13) Connect to the computer via USB, you can transmit CAT, IQ and audio. 14) 160 kHz span, with scalability.
15) Sensitivity-Under the condition of up to 250MHz, s / w is 0.3μV = 10dB.
16) Due to the characteristics of the msi001 chip used, the dynamic blocking range is about 85dB. 17) There is backlight control.
18) SMA female (outer screw and inner hole) antenna socket;
19) Dimensions 102X74X23mm (excluding protrusions).
20) The weight is about 300g.
=======================================================================
Type #3 50KHz to 2GHz 3.5inch
Features:
- Registration code purchased from the official enables on-line upgrading
- DSP SDR Receiver for Malahit
- Capacitive touch screen
- Flash via USB cable
- Default frequency range: 50MHz to 2GHz
- Demodulation mode: AM, SSB, NFM, WFM
Product Parameters:
1) The radio is built on the principle of SDR-the function is determined by loaded software;
2) Frequency range: 50MHz to 2GHz;(Registered version)
3) All types of analog modulation: AM, SSB, NFM, WFM;
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, for Noise Blanker, AGC, equalizer;
5) Use cheap but fully functional chip msi001;
6) The powerful stm32h743 with a clock frequency of 480 MHz is applied;
7) 3.5-inch IPS display touch screen;
8) There is a built-in UHF;
9) Controls: 2pcs; encoders with buttons and touch screen;
10) It is powered by an external TYPE-C (for Huawei mobile phone) interface or battery (battery is not included), which can be charged by TYPE-C.
11) Consumption: 300mA when listening to headphones;
12) The reception on built-in telescope or external antenna is to improve the HF reception on telescope antenna, and an additional board with source follower has been developed. The board will be built into standard receiver design.
13) Connect to computer via USB, which can transfer CAT, IQ and audio.
14) 160 kHz span, with scalability;
15) Sensitivity: Under the condition of up to 250MHz, s/w is 0.3μV = 10dB; due to lack of measurement equipment, so the above measurements were not taken;
16) Due to the characteristics of msi001 chip used, dynamic blocking range is about 85dB.
17) With backlight control;
18) SMA female antenna socket;
19) Motherboard size: 100 x 70mm (without the sizes of connectors);
20) Motherboard weight: 75g.
Package Included:
- 1 x Set of SDR Receiver +A
ntenna
(with Aluminum Alloy Shell)
Note:
- With registration code purchased from the official.
- The motherboard can be powered by TYPE-C charger for Huawei mobile phone. It can be equipped with a long wire as an antenna for easy listening.
- Other items pictured are not included, for demonstration purposes only.
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.